Comments on: Getting ADUC to see the Exchange 2003 Attributes on Windows Vista… http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/ | The Ramblings of an Exchange Admin | Wed, 02 Dec 2009 12:51:12 +0000 http://wordpress.com/ hourly 1 By: R http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2670 R Mon, 18 May 2009 18:13:17 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2670 I have also been trying to get this to work on Windows 7, no luck. I've tried every way to Sunday and always get an error opening ADUC account properties after the dll registration. Side Note - If you unregister the maildsmx.dll (with the -u on the end of the regsvr32.exe command) you will get the ADUC to open account properties, but no Exchange Extensions. (sigh) Is this Microsoft forcing us admins to upgrade to Exchange 2007 or 2010 coming out soon? I have also been trying to get this to work on Windows 7, no luck. I’ve tried every way to Sunday and always get an error opening ADUC account properties after the dll registration.

Side Note – If you unregister the maildsmx.dll (with the -u on the end of the regsvr32.exe command) you will get the ADUC to open account properties, but no Exchange Extensions.

(sigh)

Is this Microsoft forcing us admins to upgrade to Exchange 2007 or 2010 coming out soon?

]]> By: Max http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2669 Max Thu, 12 Mar 2009 18:07:00 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2669 I am also trying to get Windows 7 to work. It all seems to go well until the last "regsvr32". I get the following popup errors: regsvr32.exe - Entry Point Not Found The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll. regsvr32.exe - Entry Point Not Found The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll. Microsoft Active Directory - Exchange Extension The specified procedure could not be found. Facility: Win32 ID no: c007007f Microsoft Active Directory - Exchange Extension RegSvr32 DllRegisterServer in C:\Windows\syswow64\maildsmx.dll succeeded. Of course, the last popup was an incorrect success message. When I try to open AD Users and Computers, it says MMC could not create the snap-in. It probably said the same thing before applying the exchange hack, but I'm not sure. I'll have to test this on a fresh install. I am also trying to get Windows 7 to work. It all seems to go well until the last “regsvr32″. I get the following popup errors:

regsvr32.exe – Entry Point Not Found
The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll.

regsvr32.exe – Entry Point Not Found
The procedure entry point I_NetNameCanonicalize could not be located in the dynamic link library NETAPI32.dll.

Microsoft Active Directory – Exchange Extension
The specified procedure could not be found.
Facility: Win32
ID no: c007007f
Microsoft Active Directory – Exchange Extension

RegSvr32
DllRegisterServer in C:\Windows\syswow64\maildsmx.dll succeeded.

Of course, the last popup was an incorrect success message. When I try to open AD Users and Computers, it says MMC could not create the snap-in. It probably said the same thing before applying the exchange hack, but I’m not sure. I’ll have to test this on a fresh install.

]]> By: Nick http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2668 Nick Tue, 20 Jan 2009 23:18:52 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2668 any idea how to make this work in Windows 7? i tried following all the steps, including the comments for Vista x64, and am having no luck. any idea how to make this work in Windows 7? i tried following all the steps, including the comments for Vista x64, and am having no luck.

]]> By: Roy http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2666 Roy Thu, 24 Jul 2008 14:54:56 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2666 I just did this on my Vista SP1 32bit workstation with the RSAT tools for server 2008 (never had the 2003 adminpak installed) and it works great. Thanks I just did this on my Vista SP1 32bit workstation with the RSAT tools for server 2008 (never had the 2003 adminpak installed) and it works great.

Thanks

]]> By: Mugabi http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2667 Mugabi Thu, 10 Jul 2008 22:05:34 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2667 Thanks a bunch for this...and thanks for the update SeanRinVA! Thanks a bunch for this…and thanks for the update SeanRinVA!

]]> By: Anthony http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2665 Anthony Thu, 05 Jun 2008 20:25:08 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2665 Remember to copy those files into the SysWOW64 directory if running x64 Vista. Run the regsvr32 command in admin mode from there. Unfortunately it breaks when you install the new management tools (RSAT) on Vista SP1. Even reregistering the files again doesn't bring back the exchange attributes...not that I've found anyways. :( Remember to copy those files into the SysWOW64 directory if running x64 Vista. Run the regsvr32 command in admin mode from there.

Unfortunately it breaks when you install the new management tools (RSAT) on Vista SP1. Even reregistering the files again doesn’t bring back the exchange attributes…not that I’ve found anyways. :(

]]> By: Dor Horwitz http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2664 Dor Horwitz Thu, 29 May 2008 05:47:49 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2664 Fantastic - thank you very much. Fantastic – thank you very much.

]]> By: Chris http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2663 Chris Mon, 10 Mar 2008 20:26:02 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2663 Great job!! And thanks to SeanRinVA, after adding that last dll everything worked perfectly! Great job!! And thanks to SeanRinVA, after adding that last dll everything worked perfectly!

]]> By: SeanRinVA http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2661 SeanRinVA Thu, 20 Dec 2007 20:23:21 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2661 Your steps are missing one DLL - escprint.dll. I found that it was needed via the MS Technet Forums...but these instructions are the first ones to come up, so it might be good to update them. Your steps are missing one DLL – escprint.dll. I found that it was needed via the MS Technet Forums…but these instructions are the first ones to come up, so it might be good to update them.

]]> By: Steve http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2662 Steve Tue, 13 Nov 2007 17:26:06 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2662 Got an error message: "The Module "c:\windows\system32\maildsmx.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependant .DLL files. The specified module could not be found. Got an error message:

“The Module “c:\windows\system32\maildsmx.dll” failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependant .DLL files.
The specified module could not be found.

]]> By: Weekend reading - subject: exchange http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2660 Weekend reading - subject: exchange Mon, 30 Jul 2007 09:37:29 +0000 http://telnetport25.wordpress.com/2007/07/26/getting-aduc-to-see-the-exchange-2003-attributes-on-windows-vista/#comment-2660 [...] Getting ADUC to see the Exchange 2003 Attributes on Windows Vista… [...] [...] Getting ADUC to see the Exchange 2003 Attributes on Windows Vista… [...]

]]>